High-security bollards

ARMIS automatic high security bollards with integrated hydraulic drive are used both for passageways with increased passage frequency and for simple high security barriers. They are suitable for access control in city centers or for sensitive areas.

The benefits

• certified safety
• high operational safety
• long service life due to very high corrosion resistance
• intelligent control with optional remote monitoring
• attractive, timeless design
• identical design as fixed and manual bollards
• optimal visibility

Impact resistance
M30, 640 kJ, 7,2t@48km/h

Certification
IWA 14-1:2013 Bollard V/7200[N2A]/48/90:1.8
PAS 68:2013 Bollard V/7500[N2]/48/90:1.6/1.7

The new stationary (fixed) high security bollards ARMIS 72|30 with an installation shaft and a well-designed stainless-steel cover impress with their performance (no penetration depth) and can be removed or dismantled if necessary.

Fixed high security bollards are used where passage widths are to be reduced in combination with automatic bollards or as an effective passage barrier in city centers or for sensitive areas.

The benefits

• certified safety
• removable
• durability due to very high corrosion resistance
• attractive, timeless design
• identical design as automatic and manual bollards
• optimal visibility

Impact resistance
M30, 640 kJ, 7,2t@48km/h

Certification (zero depth of penetration)
IWA 14-1:2013 Bollard V/7200[N2A]/48/90:0.0
PAS 68:2013 Bollard V/7500[N2]/48/90:0.00

The ARMIS 72|50 retractable anti-terror bollards with integrated hydraulic drive are suitable for protecting access to city centres or for high-security barriers at particularly sensitive facilities such as research centres, embassies, police facilities, military bases and many more.

The advantages

• High operational reliability
• Long service life due to high corrosion resistance (optional additional treatment)
• Intelligent control with optional remote monitoring
• Attractive, timeless design
• Optimum visibility

These fixed high security bollards from Marshalls impress with their low installation depth. With only 100 mm, these bollards can also be used where the ground is occupied by pipes, cables, parking garages or subways.

The special feature of these bollards: special sleeves (covering) that can be put over the bollard. These offer almost unlimited design possibilities.

The benefits

• certified safety
• low installation depth of 100 mm
• manifold design possibilities due to covering-system

Impact resistance
M30, 640 kJ, 7,2t@48km/h

Certification
IWA 14-1:2013 Bollard V/7200[N2A]/64/90:7.6